Generally speaking, the LCD screen panel does not attach the inverter,you should install the screen with your original inverter or another new inverter.If the LCD screen attached the free inverter,generally this inverter maybe can't match your laptop,or the screen can't work fine after you install it.Since we get the screen directly from factory,The factory use this attached inverter to test the screen .That is why we inquire you to install the screen with your original inverter.

The inverter size and type may vary, but the replacement procedure is very similar and all Dell inverters are glued to the metal inverter holder with a double-sided adhesive tape.

There are two method to remove inverter.

1.Just remove inverter  

2.Remove inverter with brackets

1.Just remove inverter 

The screen must be disconnected from the laptop. See screen replacement instructions

160
Remove the screw
161

Disconnect inverter cable

162

Carefully insert a small flat screwdriver between the inverter and the metal plate and gently push the screwdriver forward to get the inverter off the plate.

Tips: Inverter board is very fragile and easy to crack. Don't bend the board because you can damage transformer soldered on the inverter.

163

165

166

169

Inverter completely disconnected from the screen

2.Remove inverter with metal brackets

00

inverter has been removed with brakets

11

Comments (0)

Subscribe to this comment's feed