Here is www.yall.net Tools required: Torx 5 screwdriver

• First remove the battery cover, battery and memory card. Move the slider down and remove the two screws you see.
  
  

• Now move the slider up and remove the two screws at the top of the phone.

• Run your fingernail along the edge of the join of the front cover to unclip it.

• You should now have the front cover removed. The keypad should be loose as well.

• Flip the keypad part back to access the ribbon which connects the LCD to the phone.

• The screen is attached to the circuit board by a ribbon (indicated below by the screwdriver) which attaches like a plug and socket. Simply lift the connector up to unplug it.

• Lift the screen away from the rest of the phone. Your phone should look like below and you can replace the LCD. Reverse the whole procedure for reassembly .

Here is www.yall.net Welcome Next Time! ^^

Comments (0)

Subscribe to this comment's feed