| Tell you how to replace Nokia N80 LCD | |
|
Just replace the N80 LCD screen... Here's how I replaced the LCD... Tools required: T6 screwdriver & pair of non magnetic tweezers or a plastic shim such as a guitar plectrum
Using the handle end of the tweezers, insert them into the grooves, shown by the arrows below
Lever the tweezers out to undo the tabs at the top and middle and your phone will be like below. Slide the top cover down towards the keypad to remove it.
Next remove the soft key board by removing the screws indicated below
Now remove the LCD screen by disconnecting the ribbon cable, which the arrow shows below. Gently lift this part until it unplugs from the main board
Using the tweezers, pop out the screen by levering it with the tweezers in the area indicated by the arrows in the picture below
Your phone should now be as pictured below
Replace the old LCD with new Reverse the procedure for disassembly and it's finished
Set as favorite
Bookmark
Email This
Hits: 2000 Comments (0)
![]() Write comment
You must be logged in to post a comment. Please register if you do not have an account yet.
Newer news items:
Older news items:
|







