|
|
|
Tools needed for Assembling and Disassembling 1. Glove & Lens Cleaning Tissue. 2. Plastic type tweezers. 3. Philip Screw Driver 000X40. 4. Philip Screw Driver T6X40 5. Flat Plastic Stick |
|
|
|
Circles on photos indicate the location of screws and where you should pay attention.
You need two kinds of screwdrivers, a small Phillips and Torx to dismantle it. Do not forget to empty the microSD card slot. |
|
|
| How to dismantle the motorola Z3 |
|
This guide will help you replace housing parts and get to the inner parts of your phone. I am in no way responsible for any damage occurred to your phone. If you follow my instructions in this guide you should be ok. But you need a lot of time and patience when disassembling your phone.
YOU MUST READ EVERYTHING CAREFULLY! |
|
|
|
That I can tell to everyone, all the possible mods can be dismantle on this phone are listed bellow................
First, Where it says pininfarina on the inside panel, you can put a different color behind it like pink or something you want which will change the color slightly to that color.
The second,The blue parts on the flip near the rim come off, but they are held together by plastic plugs if those break then youll have to crzy glue to hold it in place, but ya you can take them out and paint them a dif color if you want.
And the third,The LED behind the M logo is too far to the right so only the right side of the M lights up, inside the flip tho, there is a plastic piece covering the M logo, you can remove that if you like, still the right side will be more brighter but the light at least is stronger and you can kind of see inside the flip with that removed.. i duno more of a preference of each person. And the images bellow:
|
|
|
|
Tools Required:Case opening tool, T6 Torx Driver, Precision Philips Screwdriver
Start:Cingular 8525 with required tools
|
|
|
|
Cracking open the LG C1300 flip phone...
This is YallCenter.Com,Here we go.If you want to spread the phone apart the correct way, that is, remove the hinged pieces, use a very stiff straight-blade screwdriver and insert it into the side of the hinge that is opposite the printed circuit ribbon end of the hinge(we are speaking here of the central one-piece hinge, not the outer 'ears!). The next point is what will make-or-BREAK your attempt to successfully open the LG case containing the screen on the other LG phones! Use your screwdriver to push from the open end of the hinge OPPOSITE the pc ribbon, and direct your effort HARD along the longitudinal axis of the hinge, that is, the LONG axis. The spring that holds the pin engaged is VERY STIFF! You have to overcome this tension, and when you do,
|
|
|
|
Tools required: Phillips screwdriver
This is YallCenter.Com,Here we go.
1) Remove the battery and four black screws you can see
|
|
|
|
This is Yall.Net ,Here we go.Tools required: Torx 6 screwdriver
Remove back cover and battery. Now unclip the front cover. It should be lifted away from the bottom of the phone, as pictured below
|
|
|
|
|
|
|
|
|
Page 1 of 5 |