Here is our post www.yallcenter.com.In this guide I will explain how to disassemble the display panel and remove LCD screen

with inverter board from a HP Pavilion dv9000 series laptop. Do not disassemble your laptop if it’s still under warranty.

You’ll find instructions for removing hard drive, memory, wireless card and keyboard in myprevious post.

LCD screen and inveter board removal instructions.

First, remove the battery. There are five screw seals located on the LCD screen bezel. Remove all five

seals with a sharp object. Remove all five screws found under the seals.

Now we are going to remove the LCD screen bezel. Insert your fingers between the bezel and LCD screen

and carefully disengage plastic latches.

Continue removing the bezel.

LCD sceen bezel has been removed.

You’ll find the inverter board under the screen. Carefully unplug cables from both sides of the inverter board.

Remove the screen inverter and replace with a new one if needed.

Remove three screws from each side of the screen. These screws securing the screen hinges to the cover.

Now you can access the back side of the screen. Carefully remove sticky tape securing the video cable.

Unplug the video cable from the screen.

Remove two screws from each side of the LCD screen. These screws securing the screen to the hinges.

Remove the screen and replace it with a new one if needed.

LCD screen, bezel and inverter have been removed.

Comments (0)

Subscribe to this comment's feed