| How to dismantle the motorola Z3 - 11.Slide the phone open and push the main keypad out from the opposite side. | |
|
Page 2 of 8 11.Slide the phone open and push the main keypad out from the opposite side. 
12. Turn the phone back over and push up gently on the lower housing while holding the top LCD housing so it partly unclips. 
13. Now put one finger in the middle holding the silver plate and lift up the top right hand corner with your nail so it unclips. You have to use a bit of force to do this. Now unclip the other corner. Carefully 
14.Slowly lift and unhook the ribbon from the middle housing. 
Your phone should now look like this. 
15. Next is to remove the the camera unit, push the opening tool under the small resistor to the right of the camera, do this gently then lift the camera unit out. 
16. Now lift out the orange antenna cover. 
17.Now lift the antenna out by placing the tweezers behind the middle clip and the gently hinge it up. 
18. Unclip the 4 lower housing clips by pushing them with the tweezers to release them from their catches. It will then simply pull out of the lower housing. 
19. Get the top LCD housing and unscrew the two T4 screw at the top. 
20. Gently lift the metal sliding plate at the top to create a gap at the top of the housing were you just unscrewed the T4 screws. 
Newer news items:
Older news items:
|
