| HTC P4350 Disassembling | |
|
Tools needed for Assembling and Disassembling 1. Glove & Lens Cleaning Tissue. 2. Plastic type tweezers. 3. Philip Screw Driver 000X40. 4. Philip Screw Driver T6X40 5. Flat Plastic Stick
Main Unit 
1. Eject the Stylus. 
2. Eject the micro SD card if available. Release rear cover lock by pressing to right 
Release battery 
Unfasten 4 screws located on rear of unit 
Release the antenna & speaker module 
Disassembly C & D parts. Carefully insert flat plastic stick into the gap between C & D part. Be noticed this action should be performed very carefully. 
Using the flat stick and move along the gap of the unit. 
Release the housing 
Unfasten one screw which fix the MB 
Disassemble vibrator, and release keyboard FPC 
Release board from its hook 
Lift up the main board, release the LCM FPC and take out the MB 
Release Camera from its connector 
Unfasten 6 screws located on C & D part (rear housing) 
Release keyboard 
Unfasten 4 screws as shown on picture 
Upper part dis-assembly 
Release receiver 
Unfasten two screws of RF board and two located on metal dome 
Release LCM FPC, separate RF board from LCM 
Release keypad from Bezel 
Disassemble display bottom COVER Unfasten the screws 
Remove slider from bottom cover 
Remove slider from its hinge 
Set as favorite
Bookmark
Email This
Hits: 2515 Comments (0)
 Write comment
You must be logged in to post a comment. Please register if you do not have an account yet.
Newer news items:
Older news items:
|
Subscribe to this comment's feed
