This is YallCenter.Com,Here we go.Tools required:Torx 6 screwdriver, Phillips screwdriver

1. Remove the back cover, battery and four screws you can see

2. Next run a fingernail along the edge of the antenna cover to remove it

3. Next run a fingernail along the edge of the housing to remove the front cover

4.With the front cover now removed you can access the keypad part. Lift this from left to right to remove. It clips onto the circuit board attaching like a plug and socket. Simply lift away and to unplug

5.Your phone will now look like below giving you access to the LCD screen

6.Flip the screen over from right to left to access the ribbon which connects the screen and circuit board. Unplug the ribbon by lifting it upwards. If you only need to replace the LCD you do not need to go any further in the disassembly procedure. Simply replace the LCD and reassemble

7. Unplug the ribbon indicated below. Slide the ribbon through the gap in the circuit board

8.Your phone should now look like the picture below and you have pretty much finished disassembly. Other parts still in the chassis, like the buttons, camera etc will pop out very easily if need be.Thank you to enjoy, welcome to view other articles.

Comments (0)

Subscribe to this comment's feed